Enerzone Wood Stoves

Enerzone Wood Stoves

Enerzone Wood Stoves
Enerzone Solution 3.4

Why Choose Enerzone?

Rugged – Enerzone Wood Stoves are made with steel up to 3/8” thick! Yes, you are buying value and peace of mind.

Efficient & Clean – Enerzone provides less heat loss through the flue, longer burn times and fewer particles into the atmosphere. All models are rated by the EPA and offer an optimum efficiency of 75% or more.

Baffle – Enerzone Baffles are made of revolutionary C-Cast material. Easily removable and proven to last.

Door Latch – Enerzone offers an easily adjustable door latch, insuring a close and air-tight fit every time.

Firebrick – Enerzone uses heavy duty ceramic fire brick for full radiant heat and firebox protection. This is not the same firebrick found in inexpensive, poor quality stoves.

Door Overlay – Update the look of your Enerzone Wood Stoves without changing the whole door.

Air Wash System – With all Enerzone wood heating solutions, your glass stays clean. Enjoy the view!

Made in North America – Produced in North America using industry leading technology. Guaranteed to exceed your expectations.

Burn

The combustion time for an EPA-certified, non-catalytic wood appliance depends on many factors, the most important being the size of its firebox. Heaters with a 2.0 cubic foot firebox will burn from 6 to 8 hours. No matter what the appliance model, the maximum BTU output will be obtained over approximately 33% of the total burn cycle. This represents 2 to 3 hours for a medium size stove.  So realistically, you will have to reload the unit every 3 or 4 hours in order the get the maximum heat out of your appliance when you are home. If you don’t reload the heater and let it burn the remaining fuel, your output will slowly decrease until there is no useful heat left to produce (we call this the “tail end” of the combustion cycle). This “tail end” will provide heat for another 4 to 5 hours. So if you are looking for a 6 to 8-hour burn time, make sure you choose an EPA-certified wood heater with a BTU output (using cordwood) of 60,000 BTU or more. Appliances with that kind of output all have fairly large fireboxes. If you are going to rely mostly on wood for heating and your house has more than 2,000 square feet, do not hesitate to choose one of our larger units (>85,000 BTU). Those appliances will have a burn time of approximately 8 to 10 hours.

Enerzone Wood Stoves