Fireplace Xtrordinair Large Flush Wood Hybrid Fire Inserts
The Fireplace Xtrordinair Large Flush Wood Hybrid Fire Inserts are the cleanest burning, most efficient wood burning fireplace inserts in the world. These inserts feature Hybrid-Fire technology which allows them to burn at extremely high efficiency rates and produce less than one gram of emissions per hour. Hybrid Fire is a fusion of catalytic and non-catalytic technologies that combined, produce an exceptionally clean burn that emits virtually no smoke or carbon monoxide. Hybrid Fire allows you to burn cleaner fires for longer periods of time, using less wood and saving you trips to the wood pile.
The Fireplace Xtrordinair Large Flush Wood Hybrid Fire insert can accommodate medium to large fireplaces. The smaller version, the Fireplace Xtrordinair Small Flush Wood Hybrid Fire insert is perfect for any small fireplace opening. These units conveniently fit flush to the hearth and feature a beautiful arched door and classic Wilmington face or rectangular door and Shadowbox, Metropolitan, or Universal face.
The Large Flush Wood Hybrid Fire Insert features the world’s cleanest burning wood technology combined with a huge fire viewing area. Wood is the world’s most inexpensive fuel as well as a renewable resource. The Fireplace Xtrordinair Large Flush Wood Hybrid Fire Insert uses a fusion of high performance wood combustion and catalytic technology in what we call Hybrid Fire technology. Primary combustion occurs within the firebox. Secondary air is introduced through air tubes re-igniting the flue gas as it leaves the firebox. This same gases are then passed through a catalytic combust or to dramatically reduce emissions while at the same time increasing heat output and efficiency. With Hybrid Fire technology, virtually no smoke exits the appliance. This super clean burning insert boasts emissions of only .58 grams an hour as well as almost zero carbon monoxide output throughout all burn cycles. Because of its superior performance this large insert is capable of heating up to 2,500 square feet, with up to a 12 hour burn time.
Hybrid Fire Technology
The Large Flush Wood Insert is y far the cleanest burning, large insert available on the market. Featuring unparalleled craftsmanship and styling as well as the cutting edge science. This combination of the catalytic combuster and air tubes is what creates this unique and ultra efficient Hybrid Fire technology.
The super efficient combustion air is drawn into the preheated chamber converting cold, incoming air into warm combustion air. This air is then routed through the air wash channels and into the air wash which primarily keeps the glass very clean, decreasing maintenance and adding convenience. The air control regulates incoming air controlling the burn rate and is then routed into the firebox by the primary combustion air (which helps to start the fire.)
The secondary air manifold continues to route the air into the secondary tubes which takes the air to the secondary combustion zone. In this area, any unburned particles are re-ignited. The Baffle slows down the gases from being expelled without one last clean sweep from the catalytic combust or which reignites all volatile gases. No particle is left behind. This process dramatically reduces emissions and carbon monoxide output making the Large Flush Wood Insert a very ‘green’ fireplace.
Room air is drawn through the back convection chamber then circulated through the convection channel where it is heated. This hot air is then expelled from the top convection chamber through a large, cast iron, heat sink increasing the temperature of the room. Additionally, twin 90 cdm fans push convection air through the stove greatly improving heat transfer and circulation into the room. A bypass damper is also included on the Large Flush Wood Insert, allowing for easy, smoke free start ups. The insert comes standard with a 6″ flue collar with internal attachment for convenient installation as well as the optional GreenStart igniter, making the start up process as easy as the push of a button.
Dare To Compare
Compared to any other large fireplace inserts on the market you will find the Large Flush Wood Insert you best choice – We Dare You To Compare!
- 80.5% Overall Efficiency. Tested to the Federal Governments proposed B4-15 Effciency Standard. Efficiency is the averaged over all burn settings to give you “Real World” performance. Don’t be fooled by over inflated efficiency numbers used by other competitors.
- Hybrid Fire technology produces virtually 0% Carbon Monoxide into the atmosphere.
- Built in Bypass damper allows for easy start up oaf fire and smoke free reloading of wood.
- Approved for masonry and zero clearance fireplaces.
- Very clean appearance being entirely flush to the hearth.
- Firebox is 3.0 cubic feet in size and has the capacity to accommodate a 24″ log.
- Single cast iron door framing 319 square inches of glass allotting for tremendous view of the fire.
- An unobstructed air wash system maintains the cleanliness and clarity of the glass.
- Twin 90 CFM easily concealed fans come standard with the insert greatly improving heat transfer.
- Option of adding the revolutionary GreeStart auto igniter.
Made In America
The Fireplace Xtrordinair Large Flush Wood Hybrid Fire Inserts are premium quality with a long lasting value. The insert is American made and created out of only the highest quality materials such as heavy gauge steel (up to 5/16″ thick), unibody firebox, real masonry brick, stainless steel baffle and air tubes. All of this contributes to the durability and longevity of the product with is backed by Fireplace Xtrordinair’s “Real World” Seven Year warranty.